Somfy Roller Shutter Motor Oximo 50 WT 6/17, 10/17, 15/17, 20/17, 30/17 (6-30Nm)
€147.90*
Available, delivery time: 1-3 days
The new series of electronic roller shutter motors with a large scope of performance and a plug`n`play assembly recognizes both the correct direction of rotation and the position of the end positions. The permanent torque monitoring detects obstacles in the downward travel as well as a frozen roller shutter (freeze protection). So that these functions can be guaranteed, you need tube connectors, such as the Secu-Block, which also serves as a security device. Thanks to the excellent software of the motor, it is able to automatically correct the end positions even after installation. Furthermore, up to 3 motors can be connected in parallel without the need for an additional relay.
Somfy motor with electronic torque monitoring (Somfy Drive Control). Obstacle detection when closing (only with fixed shaft clip connectors) and anti-freeze protection when opening.
The motor can have fixed end positions above / below or automatic end positions (fixed shaft clip connector and stopper / angled end rail required).
ATTENTION! Can only be adjusted with Somfy adjustment cable.
You can use the Somfy adjustment cable to set the end positions and direction of rotation of the motor:
Point to point:
- Point above to automatic end position below (obstacle detection) - Fixed shaft clip connector required!
- Automatic end position above to point below (freeze protection) - stopper / angled end rail required!
- Automatic top end position to Automatic bottom end position - fixed shaft clip connector and stopper required!
Product highlights
- The Somfy drives are characterized by high quality workmanship, particularly quiet running and a long service life.
- The Somfy Drive Control increases the service life of the roller shutters and the mechanical components through continuous electronic torque monitoring.
- The end position detection for the upper and lower end positions can be saved and recognized automatically. For this, the roller shutter must have an upper stop.
- The end positions are constantly checked by the motor and corrected if necessary.
- The light stop ensures a low load on the curtain and stop through constant optimization of the stop forces.
- The motor's obstacle detection detects whether the roller shutter is running against an obstacle or is blocked (e.g. by freezing) and switches off automatically without being damaged.
- Somfy Oximo motors can be connected in parallel directly and without an additional isolating relay.
- The plug-in connection cable is connected to the motor via a plug connection and can be easily exchanged if necessary.
- The tubular motors are equipped with a durable planetary gear and are completely maintenance-free.
- In the event of high heat development, the integrated thermal protection switch protects the motor from overheating. After cooling down, operation is possible again.
- Somfy Oximo motors are VDE certified 3m cable incl.
| Motorfunktionen: | Festfrierschutz, Hinderniserkennung, Plug & Play Motor |
|---|---|
| Motortyp: | Standard-Elektronisch |
| Steuerungsart: | Kabelgebunden |
| Wellendurchmesser: | Für 60mm Achtkantwelle |
| Bezeichnung : | Oximo 50 WT 6/17 | Oximo 50 WT 10/17 | Oximo 50 WT 15/17 | Oximo 50 WT 20/17 | Oximo 50 WT 30/17 |
| Motor : | Maxi - Motor | Maxi - Motor | Maxi - Motor | Maxi - Motor | Maxi - Motor |
| Motorart : | Elektronischer Antrieb | Elektronischer Antrieb | Elektronischer Antrieb | Elektronischer Antrieb | Elektronischer Antrieb |
| Rolladenwelle : | 60 er | 60 er | 60 er | 60 er | 60 er |
| Zugkraft in Nm : | 6 Nm | 10 Nm | 15 Nm | 20 Nm | 30 Nm |
| max Zugkraft (kg) : | 12 | 21 | 32 | 43 | 65 |
| Drehzahl Umin : | 17 U/min | 17 U/min | 17 U/min | 17 U/min | 17 U/min |
| Leistungsaufnahme Watt : | 90 Watt | 120 Watt | 140 Watt | 160 Watt | 240 Watt |
| Nennspannung V: | 230 V | 230 V | 230 V | 230 V | 230 V |
| Frequenz: | 50 Hz | 50 Hz | 50 Hz | 50 Hz | 50 Hz |
| Schutzart : | IP 44 | IP 44 | IP 44 | IP 44 | IP 44 |
| Thermoschalter : | Ja | Ja | Ja | Ja | Ja |
| Endabschaltung : | 28 | 28 | 28 | 28 | 28 |
| Motorkopf cm : | 2,00 cm | 2,00 cm | 2,00 cm | 2,00 cm | 2,00 cm |
| Rohrdurchmesser cm : | 4,50 cm | 4,50 cm | 4,50 cm | 4,50 cm | 4,50 cm |
| Motorlänge cm : | 62,5 cm | 67,5 cm | 67,5 cm | 67,5 cm | 69,50 cm |
| Kabellänge : | 3 m | 3 m | 3 m | 3 m | 3 m |
| Garantie : | 2 Jahre | 2 Jahre | 2 Jahre | 2 Jahre | 2 Jahre |
Login