The electronic tubular motor for roller shutter elements from the 50 mm shaft.
Our clever drive offers a fully automatic plug & play mode or a manual set mode, which can be set via the end positions. The requirement for operation in fully automatic mode is the use of fixed shaft connectors and stoppers or an angled end rail.
If the roller shutter hits an obstacle when lowering, the resistance will be over the Shutters and passed to the motor thanks to the fixed shaft connector. This then responds with a STOP. The obstacle is released and the roller shutter, property and personal protection is guaranteed. In addition, the motor switches itself off if the roller shutter curtain gets stuck in the guide rails due to frost when an up or down command is given. This prevents damage to the roller shutter.
- Pulling power from 6 Nm - 40 Nm
- Including pre-assembled adapter set for the 60 mm octagonal tube
- Fully automatic end position detection (plug & amp; play) or manual end position setting (set mode)
- Regular end position correction in fully automatic mode (every 60 cycles)
- Freeze protection / torque cut-off with shaft clip connectors
- Differentiation between obstacle and friction
- The set endpoints are retained even after a power failure
- Product quality in accordance with international certifications (CD, VDE, NF)
Motorfunktionen: | Festfrierschutz, Hinderniserkennung, Plug & Play Motor |
---|---|
Motortyp: | Standard-Elektronisch |
Steuerungsart: | Kabelgebunden |
Wellendurchmesser: | Für 60mm Achtkantwelle |
Artikelnummer | 2254197 |
Bezeichnung | VOLTA 50 PS |
Drehmoment | 6 Nm |
Drehzahl | 17 U/min |
Adaptersatz | 60 mm Achtkantwelle |
Endschalterkapazität | unbegrenzt |
Leistung | 90 W |
Stromversorgung | 230 V / 50 Hz |
Zuleitung | 2,5 m |
Gesamtlänge Motor | 593 mm |
Schutzart | IP 44 |
Schutzklasse | I |
Zertifizierung | CE - VDE - NF |
Zugkraft Rollladenhöhe 1,5 m / 2,5 m | 12 kg / 11 kg |
Login